|
Ultasonic\Adaptive (fills while online) |
|
2000-3500 |
|
40 |
|
5.0 |
|
three-phase |
|
15.2 / 7.6 / 6.1 |
|
10 |
|
44″W x 109″H x 47″L |
|
TBD |
|
78 @ 5′ |
|
grinding & deburring dust |
|
sanding & finishing dust |
|
powder mixing |
|
wide belt sanding |
|
buffing & polishing |
Only logged in customers may leave a review.
To safely capture of hazardous/combustible dusts, such as Aluminum and Magnesium, NFPA now requires the use of a Wet Dust Collector or Wet Downdraft Table. Our WX-Series collectors feature a unique water-tree baffle, that creates a cascading water effect, removing dangerous particles as small as 3 micron from the air-stream. Dust is filtered though contact with the water droplets and contained in the bottom of the collector for safe removal at necessary maintenance intervals. Build for long duty-cycles, the WX-3000 uses an ultrasonic water sensor, and automatically adds water as needed – even during operation. Stainless steel construction on all water-exposed components, and a powerful 5.0HP TEFC motor delivering up to 3500CFM at 2.5″ external static pressure.
In 2015, NFPA updated the 484 standard requiring an interlocked offline vent fan, to prevent build-up of hydrogen gas – now included as standard on all WX-Series models. NFPA also now requires a high temperature alert any time an optional HEPA after-filter is used. Diversitech’s CSA/UL certified control panel includes a high temperature alert (pre-installed) for an optional HEPA filter, or other temperature sensitive application.